G.I Pipe
THE STANDARDS are economical and can match any propping access application where they allow support or access needed. Made from the highest quality.
| Diameter |
Size |
Mass |
| 1/2" |
1.2mm |
3.8kg |
| 3/4" |
1.3mm |
4.8kg |
| 1" |
1.3mm |
6kg |
| 1 1/4" |
1.3mm |
8kg |
| 1 1/4" |
1.7mm |
10.7kg |
| 1 1/2" |
1.2mm |
9kg |
| 1 1/2" |
1.5mm |
11kg |
| 1 1/2" |
1.7mm |
13kg |
| 1 1/2" |
1.8mm |
14kg |
| 1 1/2" |
2mm |
16kg |
| 2" |
1.2mm |
16kg |
| 3" |
1.8mm |
26kg |
| 3" |
2mm |
32kg |
| 4" |
1.8mm |
33kg |
| 4" |
2mm |
42kg |
G.I Tubular
THE STANDARDS are economical and can match any propping access application where they allow support or access needed. Made from the highest quality.
| Diameter |
Size |
Mass |
| 3/4"X3/4" |
1.2mm |
3.2kg |
| 3/4"X3/4" |
1.5mm |
4.2kg |
| 1"X1" |
1.2mm |
4.2kg |
| 1"X1" |
1.5mm |
5.2kg |
| 1"X2" |
1.2mm |
6.2kg |
| 1"X2" |
1.5mm |
8kg |
| 1"X3" |
1.2mm |
8.5kg |
| 1"X3" |
1.5mm |
10.5kg |
| 1 1/2"X1 1/2" |
1.2mm |
6.2kg |
| 1 1/2"X1 1/2" |
1.5mm |
8kg |
| 2"X2" |
1.2mm |
8.5kg |
| 2"X2" |
1.5mm |
10.5kg |
| 2"X3" |
1.2mm |
10.5kg |
| 2"X3" |
1.5mm |
13.5kg |
| 2"X4" |
1.2mm |
12.5kg |
| 2"X4" |
1.5mm |
14.5kg |
| 2"X6" |
1.2mm |
19kg |
| 2"X6" |
1.5mm |
22kg |
C-Purlins
Steel purlin is usually made of cold-formed steel that is thin enough to put screws through. Cold-formed steel is made by rolling or pressing thin sheets of steel into the desired shape. It is less expensive for the manufacturer than hot-rolled steel and is also easier to work with. Though cold-formed steel is stronger than hot-formed steel, it is more likely to break when under pressure rather than bend.
| Size |
Mass |
MM |
| 2X3 |
6.5kg |
1mm |
| |
8kg |
1.2mm |
| |
10kg |
1.5mm |
| 2X4 |
7.6kg |
1mm |
| |
9.5kg |
1.2mm |
| 2X6 |
9.5kg |
1mm |
| |
11.9kg |
1.2mm |
| |
14.27kg |
1.5mm |
| |
17.84 |
1.8mm |
© 2021 valthink solutions inc. Theme by VJB.
